Aktau-based oilfield service company specialising in electric submersible pump (ESP) systems. It supplies, installs, dismantles and services ESP units and manufactures and repairs submersible motors and centrifugal pumps at its own production base. The company was set up in 2014 on the basis of ANEK, whose history dates back to 2005, and has run ESP repair shops in Zhanaozen and at the Alibekmola field.
Kokshetau-based machine-building plant, founded in 1959 as an oxygen breathing apparatus plant. For oil production the plant makes filters that keep sand, proppant and other solids out of downhole pumps — FPPR suspended filters for sucker-rod pumps and ESPs and FVPR intake filter modules for ESPs — BFSR filter sections for these and for reservoir pressure maintenance (water injection) filters, and sucker rod guides. The filter elements are made of permeable pressed-wire material (PPM) and its layered, elastically stretched variant, PPM-UR.
According to the company's website, the FPPR filter suits production casing from 102 mm (filter OD from 74 mm), flow rates of 10 to 9,000 m³/day, filtration fineness of 30–500 µm and solids content of up to 3,000 mg/l; installation length is 1.6 to 21 m, and it is mounted on an isolation tool, a packer or the submersible motor shroud. FVPR filters are made for ESP sizes 2A, 5, 5A and 7A (OD 69–136 mm) for 100–3,200 m³/day, with fineness of 100, 200, 300 or 500 µm. The FVPR housing is not perforated: after passing the filter wall, the fluid flows to the pump along the housing rather than along the shaft through the bearings, as in perforated designs, which reduces bearing and shaft wear. BFSR sections for water-injection filters are rated for 5, 25 or 50 µm. The rod guides, made of abrasion-resistant anti-friction elastomers, are fitted onto 3/4-in and 7/8-in rods at the well site (73 mm tubing) to cut rod and tubing wear and the number of rod-pump and progressing cavity pump failures caused by rods wearing through the tubing.
The plant also makes powder and CO2 fire extinguishers and recharges them, and LPG equipment: household gas cylinders, cylinder valves and pressure regulators. Serial production of 27-litre cylinders with the VB-2P valve started in February 2026, with capacity for up to 65,000–70,000 cylinders a year. The plant has machining, casting and electroplating shops, a design bureau and a test centre, and takes orders for turning, milling and welding, lost-foam casting, heat treatment and coatings. In 2024 the company gained domestic-manufacturer status, confirmed by an industrial certificate.
Turning and milling of parts (shafts, bushings, gears, threaded parts) to customer drawings and samples · Welding and brazing of ferrous and non-ferrous metals and stainless steel, including gas-shielded welding · Lost-foam casting, heat treatment and grinding · Electroplating (anodising, zinc and nickel plating) and painting, including powder coating · +7 more
SLB (formerly Schlumberger) provides reservoir characterization, well construction, completion and production services and technologies to oil and gas operators in Kazakhstan. It works through an Atyrau-registered branch of Schlumberger Logelco Inc. (since 2001) and ТОО «Шлюмберже Центральная Азия», and runs a large operating base near Aktau, opened in 2012, that supports onshore and offshore work in western Kazakhstan and the wider Caspian region.
Heavy machinery plant in Almaty founded in 1941 that builds equipment for metallurgy, mining, power and the oil industry. Its oilfield range includes sucker-rod pump drives (pumping units of the ПШН series), their gearboxes and НБ-125 reciprocating drilling pumps; by 2021 it had produced more than 1,700 pumping units for Kazakhstan oilfield companies.
Aktobe-based machine-building plant founded in 2001 that manufactures sucker rods and couplings, centralizers for progressing cavity pump rod strings and tubing couplings with thermal diffusion zinc coating. Its production was modernised in 2014 and is certified to API Spec 11B, API Spec Q1 and ISO 9001. The company states that it holds more than 80% of the Kazakhstani sucker rod market.
VerifiedLocal (KZ)Artificial LiftTubulars / OCTG
Sucker rods · Sucker rod couplings · PCP rod string centralizers · Tubing couplings with TDZ coating
Perm-based manufacturer of electric submersible pump (ESP) systems that has supplied Kazakhstan since 2004. Its Kazakhstan company, registered in Kyzylorda, set up local ESP assembly in 2011 and runs service centres in Kyzylorda and Aktau (the latter opened in 2019), covering unit selection for wells as well as routine and major repair of ESP components. By 2019 more than 500 wells in Kazakhstan were equipped with Novomet ESPs.
Zhanaozen-based manufacturer and KazService union member that produces beam pumping units ("stanok-kachalka") and repairs oilfield equipment for operators in the Mangystau region.
