Aktau-based oilfield service company specialising in electric submersible pump (ESP) systems. It supplies, installs, dismantles and services ESP units and manufactures and repairs submersible motors and centrifugal pumps at its own production base. The company was set up in 2014 on the basis of ANEK, whose history dates back to 2005, and has run ESP repair shops in Zhanaozen and at the Alibekmola field.
Kokshetau-based machine-building plant, founded in 1959 as an oxygen breathing apparatus plant. For oil production the plant makes filters that keep sand, proppant and other solids out of downhole pumps — FPPR suspended filters for sucker-rod pumps and ESPs and FVPR intake filter modules for ESPs — BFSR filter sections for these and for reservoir pressure maintenance (water injection) filters, and sucker rod guides. The filter elements are made of permeable pressed-wire material (PPM) and its layered, elastically stretched variant, PPM-UR.
According to the company's website, the FPPR filter suits production casing from 102 mm (filter OD from 74 mm), flow rates of 10 to 9,000 m³/day, filtration fineness of 30–500 µm and solids content of up to 3,000 mg/l; installation length is 1.6 to 21 m, and it is mounted on an isolation tool, a packer or the submersible motor shroud. FVPR filters are made for ESP sizes 2A, 5, 5A and 7A (OD 69–136 mm) for 100–3,200 m³/day, with fineness of 100, 200, 300 or 500 µm. The FVPR housing is not perforated: after passing the filter wall, the fluid flows to the pump along the housing rather than along the shaft through the bearings, as in perforated designs, which reduces bearing and shaft wear. BFSR sections for water-injection filters are rated for 5, 25 or 50 µm. The rod guides, made of abrasion-resistant anti-friction elastomers, are fitted onto 3/4-in and 7/8-in rods at the well site (73 mm tubing) to cut rod and tubing wear and the number of rod-pump and progressing cavity pump failures caused by rods wearing through the tubing.
The plant also makes powder and CO2 fire extinguishers and recharges them, and LPG equipment: household gas cylinders, cylinder valves and pressure regulators. Serial production of 27-litre cylinders with the VB-2P valve started in February 2026, with capacity for up to 65,000–70,000 cylinders a year. The plant has machining, casting and electroplating shops, a design bureau and a test centre, and takes orders for turning, milling and welding, lost-foam casting, heat treatment and coatings. In 2024 the company gained domestic-manufacturer status, confirmed by an industrial certificate.
Turning and milling of parts (shafts, bushings, gears, threaded parts) to customer drawings and samples · Welding and brazing of ferrous and non-ferrous metals and stainless steel, including gas-shielded welding · Lost-foam casting, heat treatment and grinding · Electroplating (anodising, zinc and nickel plating) and painting, including powder coating · +7 more
Aktobe-based engineering and production company (Automation, Metrology, Engineering) that designs, manufactures, installs and maintains oil and gas metering systems, block-modular process units, gas separators, flare units and process control systems. Its projects include a gas flow metering system at the Bakhyt field for QazaqGaz and a block-modular pump station at the Kenkiyak oil receiving point for KazakhTurkmenOil.
Shymkent-based distributor of SKF industrial products: bearings and bearing units, seals, lubricants and lubricators, belts, chains and couplings, mounting and alignment tools, and condition-monitoring instruments. The company was registered in December 2025. SKF's distributor finder lists it as an authorized distributor in Kazakhstan, and the SKF Industrial Parts Supplier certificate published on the company's website is valid until 30 April 2027.
Parts are selected by part number, dimensions, markings or drawing, with equivalents from within the SKF range offered when an item is in short supply. The office and warehouse are in Shymkent, and orders go to any region of Kazakhstan by courier and freight services. Legal entities receive invoices and accounting documents, and deferred payment can be agreed in the contract. The industries named on the website are general industry, power, transport, mining, agriculture and cement plants.
VerifiedLocal (KZ)Maintenance & Repair
SKF product selection by part number, dimensions, markings or drawing · Equivalents from within the SKF range · Advice on mounting and lubricating bearing assemblies · Supply for planned repairs, emergency replacements and regular replenishment · +7 more
SLB (formerly Schlumberger) provides reservoir characterization, well construction, completion and production services and technologies to oil and gas operators in Kazakhstan. It works through an Atyrau-registered branch of Schlumberger Logelco Inc. (since 2001) and ТОО «Шлюмберже Центральная Азия», and runs a large operating base near Aktau, opened in 2012, that supports onshore and offshore work in western Kazakhstan and the wider Caspian region.
Burgylau is a Zhanaozen-based drilling contractor established in 1997 on the basis of the Soviet-era Uzen drilling department. It constructs production oil and gas wells and also performs workover, well completion and abandonment, with Ozenmunaigas as its main customer. The company belongs to the KazPetroDrilling group.
VerifiedLocal (KZ)DrillingWell Intervention
Oil and gas well drilling · Capital well workover · Well completion and development · Well abandonment · +2 more
Kazakh joint venture of ERC Holdings and Saipem (50/50), established in 2003, operating the ERSAI Caspian Yard in Kuryk, about 70 km south of Aktau. The yard fabricates modules, pipe racks and offshore structures and supports pipeline installation, hook-up and commissioning, and ship construction and maintenance.
VerifiedLocal (KZ)FabricationIndustrial Construction
Module and pipe rack fabrication · Offshore structure fabrication and installation · Pipeline installation · Hook-up and commissioning · +2 more
A private engineering and design company based in Atyrau (K Caspian Engineering LLP, abbreviated KCE), founded in 2007 according to the company; by its own description, it offers engineering and design solutions for the oil and gas, energy and infrastructure sectors in West Kazakhstan.
It carries out working (detailed) design for the operating Tengiz facilities under a contract with Tengizchevroil LLP: preparation and facilities of well sites, expansion of group metering units, flowlines and water lines, and upgrade of the equipment of the wastewater injection system.
All of its projects confirmed by documents on the state public-hearings portal (2024–2025) were done for Tengizchevroil under a single contract; the company's site also shows Caspian Offshore Construction and ISKER Group among its clients.
The design covers the process, piping, civil, electrical and instrumentation disciplines; pre-design and concept studies, FEED and project management are offered on the company's site without project examples.
Working (detailed) design for operating production facilities · Preparation and facilities of well sites and cluster pads · Expansion of group metering units, flowlines and water lines · Upgrades of wastewater injection system equipment, pump-house buildings · +2 more
KazMunayGas-Burenie is an Atyrau-based drilling contractor whose history goes back to the Prorva drilling office of 1963; it has operated under its current name since 2002. It drills production and exploration wells and provides drilling fluid services, cementing, coring, well completion and directional drilling with a fleet of about ten owned rigs of 100–590 t capacity. It is part of the KazPetroDrilling group rather than a subsidiary of national company KazMunayGas.
VerifiedLocal (KZ)DrillingDirectional Drilling
Production and exploration well drilling · Drilling fluid services · Well cementing · Coring · +2 more
Almaty-based oil and gas construction company providing engineering, procurement and construction of industrial facilities, main pipelines and gas treatment plants. Its client list includes Tengizchevroil, Karachaganak Petroleum Operating, NCOC, KazMunayGas and CNPC, and it also works on projects in Thailand and India.
VerifiedLocal (KZ)EPC / EngineeringIndustrial Construction
EPC of oil and gas facilities · Main oil and gas pipeline construction · Gas treatment plant construction · Mechanical, electrical and I&C installation · +2 more
Atyrau-based independent inspection company founded in 2003, which describes itself as the largest specialised NDT/NDE contractor in Kazakhstan. It runs offices and project facilities in Atyrau, Almaty, Aktau, Aksai, at Tengiz and at the Karabatan site serving Kashagan, with over 100 national inspection staff. Its clients include Tengizchevroil, KPO, NCOC and major construction contractors.
Atyrau-based supply company that has provided materials and equipment procurement for industrial projects since 2007. It sources steel products, plastic items, electrical goods, tools, electronic devices, chemicals, spare parts and equipment, and offers procurement outsourcing and cost-plus supply with delivery. The company reports working with contractors and subcontractors of Tengizchevroil, NCOC, Total E&P Dunga and the Karachaganak consortium.
Almaty-based engineering and consulting company founded in 2010 that advises subsoil users and drilling contractors on well drilling and workover. According to its website, it prepares drilling programmes and well designs, designs casing strings and wellheads with industry-standard software, runs drilling projects from tender packages and contractor selection to wellsite supervision, writes drilling rig specifications, and inspects and tests rigs before they go to work. In health, safety and the environment, it prepares HSE documentation under Kazakhstan law and plans and coordinates environmental impact assessments (EIA) and environmental permit applications.
Nearly all the Kazakhstan projects described on the website are deep exploration wells. From 2010 the company provided engineering, tendering, drilling management, completion and testing for Lucent Petroleum's wells Lebyazhye 14 and South Prorva 1, and in 2017–2018 for the 4,750 m high-pressure, high-temperature well LP3 in East Munaibai. For Sequa Petroleum it prepared tender packages, selected and inspected equipment and supervised a 6,000 m well in north-western Kazakhstan near Karachaganak and Aksai (2012–2015); for Almex Plus it did the casing design, drilling fluid selection and wellsite supervision on the 6,200 m Ansagan 2 well near Tengiz (2014); and for Alga Caspi Gas it wrote the drilling programme and the rig specification for a deep sour-gas well on the Russian border near Astrakhan (2012). In 2014 Karachaganak Petroleum Operating commissioned it to study the feasibility of batch drilling on cluster well pads with existing rigs converted for skidding. For MH Industries it wrote the specifications for two new drilling rigs and advised through their acceptance (2012–2015), and for Australian Gas Group it moved a ZJ20 rig from Kyrgyzstan to Aktau and arranged its overhaul, certification and permits (2014–2016). From 2013 it prepared the presentations of Project Eurasia — Caspi 1, a planned 15,000 m ultra-deep stratigraphic test well in the Pre-Caspian Basin — for government approval. It has also worked abroad, including in Tajikistan, Uzbekistan, Kyrgyzstan, Ukraine and offshore Congo.
The company owns the rights to its own SUPREMA software for well planning and reducing drilling risk. It has six modules — cementing, hydraulic pressure losses, kick tolerance, stuck point determination, casing design and time look-ahead (drilling duration) — and a Russian or English interface. The state certificate of registration of rights, No. 1671, was issued on 18 December 2013.
VerifiedLocal (KZ)ConsultingDrilling
Engineering: drilling programmes, well design, casing and wellhead design, including deep and sour (H2S) wells · Drilling project management: well preparation, permits and tender packages, contractor selection and wellsite supervision · Rig equipment evaluation: rig specifications, purchase tenders, inspections and system testing before the rig goes to work · Subsoil use advisory: operating under Kazakhstan law, quality control and independent monitoring of project progress, preparing and evaluating tenders · +3 more
Aktobe-based manufacturing plant established in 2006 as a Kazakh-Chinese joint venture that produces tubing and casing pipes, high-pressure vessels and tanks, gate valves, block-modular oil and gas processing units and gantry cranes. It operates on a site of more than 100,000 m2 with an in-house testing laboratory and makes products to GOST and API specifications.
Aktobe-headquartered, 100% Kazakhstani drilling fluids company founded in 2003. It provides drilling, completion and workover fluid systems with engineering support, supplies more than 3,000 chemical additives, fluid preparation and cleaning equipment and laboratory equipment, and develops its own OmacPro software. The company reports over 200 fluid engineers and more than 6,500 wells drilled with its fluids in Kazakhstan and the CIS.
Atyrau-based supplier of non-destructive testing and technical diagnostics equipment, active in the NDT market since 2008. It supplies ultrasonic, radiographic, eddy current and magnetic particle equipment, metal analyzers, industrial measurement systems, material testing machines and thermal imagers from manufacturers such as Waygate Technologies, Eddyfi, Hitachi High-Tech, Elcometer and Nikon Metrology. It also offers equipment demonstrations, repair and maintenance, metrology support and training of NDT specialists.
Atyrau construction and industrial-services company founded in 2013, holding a Category I construction licence. It carries out construction and installation works at oil-refining and petrochemical facilities, rents out construction equipment, and manufactures mobile container units for office and residential use from a 2,000 m² covered workshop and 3-hectare yard with a 10-tonne overhead crane. The Atyrau Oil Refinery and NCOC are among the operators whose logos appear on its site as partners.
Heavy machinery plant in Almaty founded in 1941 that builds equipment for metallurgy, mining, power and the oil industry. Its oilfield range includes sucker-rod pump drives (pumping units of the ПШН series), their gearboxes and НБ-125 reciprocating drilling pumps; by 2021 it had produced more than 1,700 pumping units for Kazakhstan oilfield companies.
Aktobe-based oilfield contractor providing directional and horizontal well drilling, workover and capital well repair, well testing and development, cementing and swabbing, core sampling and geotechnical investigations. It also manufactures ancillary equipment such as rope slings, circulation systems and storage tanks, and supplies and services drill bits under a state licence for subsoil-related operations.
VerifiedLocal (KZ)DrillingWell Intervention
Directional and horizontal drilling · Well workover and capital repair · Well testing and development · Cementing and swabbing · +5 more
Kazakhstan arm of the French testing, inspection and certification group Bureau Veritas, registered in the country since 2004. It works through offices in Almaty, Astana, Atyrau and Temirtau across industrial inspection, construction, management-system certification and commodities inspection. For oil and gas it covers the asset life cycle from permitting and risk analysis to QA/QC and inspection during operation.
VerifiedInternationalInspection & NDTConsulting
Inspection of pressure equipment, lifting equipment and electrical installations · QA/QC and inspection and test plan development · Design review and equipment certification · HAZID/HAZOP risk studies · +2 more
